View Full-Size Image

CANtrak Configurable Input Module

The CANtrak CCIM is a programmable sensor module that interfaces between various electronic sensors and a J1939 or NMEA 2000 Network.

The CCIM unit measures the various sensor inputs, digitises the measurements and then sends the digitized data in packets to a remote display unit such as our CANtrak display. (The CANtrak with GEM software formats and displays the data, and offers a comprehensive fault warning and acknowledgement system).

The CCIM has 7 configurable analogue inputs that can be set to measure either voltage or resistive signals. There are three digital inputs (e.g., a tacho and two fuel flow inputs - sensors not supplied.) There is a systems voltage input for measuring battery voltage. There is also a single digital 1Amp output driver for use as an external alarm or fuel shut off feature.